Back to Top

STEAM

c_wonder Coding Workshop (Grades 5 to 8, Bowmanville)

- Comments: 0

[Ages 10 to 14; Grades 5 to 8]

Bowmanville Branch
Saturday, November 19th
11:00 a.m. to 12:30 p.m.

Advanced registration required;  space is limited. Register online using the form below, in person at any locations, or by phone by calling Member Services at 905-623-7322 x2712.
No charge.

Boost your child’s STEM (science, technology, engineering, and math) skills with Ontario Tech University’s Engineering Outreach!

Each c_wonder Coding Workshop introduces participants to the fundamentals of coding. Students will explore coding concepts such as inputs, outputs, if statements, loops, variables, and operators through hands-on activities to apply what they have learned and strengthen their coding skills.

Presented in partnership with Engineering Outreach, Faculty of Engineering and Applied Science, Ontario Tech University.

Please note that caregivers of children under the age of 10 must be present in the Library for the duration of the program.

Be sure to check out other upcoming c_wonder Workshops!

Registration

You may register in person at any branch, by phoning Member Services at 905-623-7322 x2712, or online using the form below.

If you experience any issues with the form, please contact Member Services. If the form does not appear correctly, the event may be fully registered. You can check back later to see if space has opened up, or try registering through our Eventbrite page directly.

 

 

 

Date: 
Saturday, November 19, 2022 - 11:00am to 12:30pm
Category: 
Audience: 

c_wonder Coding Workshop (Grades 1 to 4, Newcastle)

- Comments: 0

[Ages 6 to 10; Grades 1 to 4]

Newcastle Branch
Saturday, October 22nd
11:00 a.m. to 12:30 p.m.

Advanced registration required;  space is limited. Register online using the form below, in person at any locations, or by phone by calling Member Services at 905-623-7322 x2712.
No charge.

Boost your child’s STEM (science, technology, engineering, and math) skills with Ontario Tech University’s Engineering Outreach!

Each c_wonder Coding Workshop introduces participants to the fundamentals of coding. Students will explore coding concepts such as inputs, outputs, if statements, loops, variables, and operators through hands-on activities to apply what they have learned and strengthen their coding skills.

Presented in partnership with Engineering Outreach, Faculty of Engineering and Applied Science, Ontario Tech University.

Please note that caregivers of children under the age of 10 must be present in the Library for the duration of the program.

Be sure to check out other upcoming c_wonder Workshops!

Registration

You may register in person at any branch, by phoning Member Services at 905-623-7322 x2712, or online using the form below.

If you experience any issues with the form, please contact Member Services. If the form does not appear correctly, the event may be fully registered. You can check back later to see if space has opened up, or try registering through our Eventbrite page directly.

 

 

 

Location: 
Date: 
Saturday, October 22, 2022 - 11:00am to 12:30pm
Category: 
Audience: 

c_wonder STEM Workshop (Grades 1 to 4, Courtice)

- Comments: 0

[Ages 6 to 10; Grades 1 to 4]

Courtice Branch
Thursday, December 29th
2:00 to 3:30 p.m.

Advanced registration required;  space is limited. Register online using the form below, in person at any locations, or by phone by calling Member Services at 905-623-7322 x2712.
No charge.

Boost your child’s STEM (science, technology, engineering, and math) skills with Ontario Tech University’s Engineering Outreach!

Each c_wonder STEM Workshop introduces participants to the fundamentals of the engineering design process as they tackle design challenges that puts their STEM knowledge to the test. Students will get a chance to explore different STEM fields and how engineering can solve its diverse and real-world issues.

Presented in partnership with Engineering Outreach, Faculty of Engineering and Applied Science, Ontario Tech University.

Please note that caregivers of children under the age of 10 must be present in the Library for the duration of the program.

Be sure to check out other upcoming c_wonder Workshops!

Registration

You may register in person at any branch, by phoning Member Services at 905-623-7322 x2712, or online using the form below.

If you experience any issues with the form, please contact Member Services. If the form does not appear correctly, the event may be fully registered. You can check back later to see if space has opened up, or try registering through our Eventbrite page directly.

 

 

 

Location: 
Date: 
Thursday, December 29, 2022 - 2:00pm to 3:30pm
Category: 
Audience: 

c_wonder STEM Workshop (Grades 1 to 4, Bowmanville)

- Comments: 0

[Ages 6 to 10; Grades 1 to 4]

Bowmanville Branch
Thursday, December 29th
10:30 a.m. to 12:00 p.m.

Advanced registration required;  space is limited. Register online using the form below, in person at any locations, or by phone by calling Member Services at 905-623-7322 x2712.
No charge.

Boost your child’s STEM (science, technology, engineering, and math) skills with Ontario Tech University’s Engineering Outreach!

Each c_wonder STEM Workshop introduces participants to the fundamentals of the engineering design process as they tackle design challenges that puts their STEM knowledge to the test. Students will get a chance to explore different STEM fields and how engineering can solve its diverse and real-world issues.

Presented in partnership with Engineering Outreach, Faculty of Engineering and Applied Science, Ontario Tech University.

Please note that caregivers of children under the age of 10 must be present in the Library for the duration of the program.

Be sure to check out other upcoming c_wonder Workshops!

Registration

You may register in person at any branch, by phoning Member Services at 905-623-7322 x2712, or online using the form below.

If you experience any issues with the form, please contact Member Services. If the form does not appear correctly, the event may be fully registered. You can check back later to see if space has opened up, or try registering through our Eventbrite page directly.

 

 

 

Date: 
Thursday, December 29, 2022 - 10:30am to 12:00pm
Category: 
Audience: 

c_wonder STEM Workshop (Grades 5 to 8, Courtice)

- Comments: 0

[Ages 10 to 14; Grades 5 to 8]

Courtice Branch
Saturday, September 24
11:00 a.m. to 12:30 p.m.

Advanced registration required;  space is limited. Register online using the form below, in person at any locations, or by phone by calling Member Services at 905-623-7322 x2712.
No charge.

Boost your child’s STEM (science, technology, engineering, and math) skills with Ontario Tech University’s Engineering Outreach!

Each c_wonder STEM Workshop introduces participants to the fundamentals of the engineering design process as they tackle design challenges that puts their STEM knowledge to the test. Students will get a chance to explore different STEM fields and how engineering can solve its diverse and real-world issues.

In this workshop, participants will gain an understanding of automotive engineering, forces acting on a vehicle, and design factors that make vehicles more efficient. Participants will be challenged to design an efficient vehicle powered by a chemical reaction. Using the engineering design process, participants will learn about the forces acting on their cars and make adjustments to their design to improve efficiency and speed. In this fun, learning-filled environment, participants will have the opportunity to make discoveries, think critically, and solve problems.

Presented in partnership with Engineering Outreach, Faculty of Engineering and Applied Science, Ontario Tech University.

Please note that caregivers of children under the age of 10 must be present in the Library for the duration of the program.

Be sure to check out other upcoming c_wonder Workshops!

Registration

You may register in person at any branch, by phoning Member Services at 905-623-7322 x2712, or online using the form below.

If you experience any issues with the form, please contact Member Services. If the form does not appear correctly, the event may be fully registered. You can check back later to see if space has opened up, or try registering through our Eventbrite page directly.

 

 

 

Location: 
Date: 
Saturday, September 24, 2022 - 11:00am to 12:30pm
Category: 
Audience: 

c_wonder STEM Workshop (Grades 1-4)

- Comments: 0

[Ages 6 to 10; Grades 1 to 4]

Online via Google Meet
Saturday, March 12th
9:00 to 11:00 a.m.

Advanced registration required; space is limited. Register online or by phone.

Boost your child’s STEM (science, technology, engineering, and math) skills with Ontario Tech University’s Engineering Outreach!

Students will get a chance to explore different STEM fields and how engineering can solve its diverse and real-world issues. Each virtual c_wonder STEM workshop aims to introduce participants to the fundamentals of the engineering design process as they tackle design challenges that puts their STEM knowledge to the test.

Engineering Outreach will be supporting students through this course; no previous experience is required!

Presented in partnership with Engineering Outreach, Faculty of Engineering and Applied Science, Ontario Tech University.

Check out the other c_wonder Workshops with Ontario Tech this winter!

Registration

You may register your child(ren) in person at any branch, by phoning Member Services at 905-623-7322 x2712, or online using the form below.

If you experience any issues with the form below or if it does not appear correctly:

  • Please try using an alternate browser, such as Google Chrome or Mozilla Firefox;
  • The event may be fully-registered. Please check back later to see if space has opened up.

Disclaimers

Before registering, please read the following disclaimers from Engineering Outreach, Faculty of Engineering and Applied Science, Ontario Tech University:

Caregiver Expectations

  • Ensure the participant is prepared for the sessions including gathering household materials in discussing the code of conduct with them.
  • Caregivers are responsible for monitoring their child during the session to ensure they are following the standards of behavior.
  • Communicate any issues with their child or issues with other children directly to the instructor through email.

Participant Expectations

  • Every participant has a responsibility to promote a safe environment and the right to be treated with respect and dignity.
  • Participants must come prepared, on time and ready to learn.
  • Microphones must remain on mute during the program unless called on by an instructor to ask a question or share their thoughts.
  • Participants are encouraged, but not required, to turn on their video camera so the instructor can assist and provide feedback as needed.
  • By joining the sessions, participants are consenting to the program being recorded by Ontario Tech University Engineering Outreach to be used for learning and improvement.
  • These videos will not be posted publicly unless edited to remove any participants.

Appropriate Behaviour

The following behaviors will not be tolerated and will either receive a warning or removal from the virtual program at the discretion of the instructor:

  • Bullying, threatening or aggressive behavior towards the instructor or other participants.
  • Using profane language or symbols in the chat.
  • Engaging in hate propaganda or other types of behavior caused by hate or bias.
  • Making inappropriate gestures or using objects to threaten or intimidate another person through video.
  • Knowingly uploading any links to the chat that contain a virus or malware.
  • Recording the programming or taking pictures of the participants.
  • Consistently refusing to mute their microphone or saying inappropriate things over the microphone.

Personal Safety

To protect personal safety, it is important that participants do the following:

  • Never reveal any personal information such as an address, phone number, etc. during the program to any participants.
  • Report any messages or behaviors during the program to your parents immediately and contact the instructor immediately.

 

Location: 
Date: 
Saturday, March 12, 2022 - 9:00am to 11:00am
Category: 
Audience: 

c_wonder STEM Workshop (Grades 1-4)

- Comments: 0

[Ages 6 to 10; Grades 1 to 4]

Online via Google Meet
Saturday, February 5th
9:00 to 11:00 a.m.

Advanced registration required; space is limited. Register online or by phone.

Boost your child’s STEM (science, technology, engineering, and math) skills with Ontario Tech University’s Engineering Outreach!

Students will get a chance to explore different STEM fields and how engineering can solve its diverse and real-world issues. Each virtual c_wonder STEM workshop aims to introduce participants to the fundamentals of the engineering design process as they tackle design challenges that puts their STEM knowledge to the test.

Engineering Outreach will be supporting students through this course; no previous experience is required!

Presented in partnership with Engineering Outreach, Faculty of Engineering and Applied Science, Ontario Tech University.

Check out the other c_wonder Workshops with Ontario Tech this winter!

Registration

You may register your child(ren) in person at any branch, by phoning Member Services at 905-623-7322 x2712, or online using the form below.

If you experience any issues with the form below or if it does not appear correctly:

  • Please try using an alternate browser, such as Google Chrome or Mozilla Firefox;
  • The event may be fully-registered. Please check back later to see if space has opened up.

Disclaimers

Before registering, please read the following disclaimers from Engineering Outreach, Faculty of Engineering and Applied Science, Ontario Tech University:

Caregiver Expectations

  • Ensure the participant is prepared for the sessions including gathering household materials in discussing the code of conduct with them.
  • Caregivers are responsible for monitoring their child during the session to ensure they are following the standards of behavior.
  • Communicate any issues with their child or issues with other children directly to the instructor through email.

Participant Expectations

  • Every participant has a responsibility to promote a safe environment and the right to be treated with respect and dignity.
  • Participants must come prepared, on time and ready to learn.
  • Microphones must remain on mute during the program unless called on by an instructor to ask a question or share their thoughts.
  • Participants are encouraged, but not required, to turn on their video camera so the instructor can assist and provide feedback as needed.
  • By joining the sessions, participants are consenting to the program being recorded by Ontario Tech University Engineering Outreach to be used for learning and improvement.
  • These videos will not be posted publicly unless edited to remove any participants.

Appropriate Behaviour

The following behaviors will not be tolerated and will either receive a warning or removal from the virtual program at the discretion of the instructor:

  • Bullying, threatening or aggressive behavior towards the instructor or other participants.
  • Using profane language or symbols in the chat.
  • Engaging in hate propaganda or other types of behavior caused by hate or bias.
  • Making inappropriate gestures or using objects to threaten or intimidate another person through video.
  • Knowingly uploading any links to the chat that contain a virus or malware.
  • Recording the programming or taking pictures of the participants.
  • Consistently refusing to mute their microphone or saying inappropriate things over the microphone.

Personal Safety

To protect personal safety, it is important that participants do the following:

  • Never reveal any personal information such as an address, phone number, etc. during the program to any participants.
  • Report any messages or behaviors during the program to your parents immediately and contact the instructor immediately.

 

Location: 
Date: 
Saturday, February 5, 2022 - 9:00am to 11:00am
Category: 
Audience: 

c_wonder Coding Workshop (Grades 1-4)

- Comments: 0

[Ages 6 to 10; Grades 1 to 4]

Online via Google Meet
Saturday, March 26th
9:00 to 11:00 a.m.

Advanced registration required; space is limited. Register online or by phone.

Boost your child’s STEM (science, technology, engineering, and math) skills with Ontario Tech University’s Engineering Outreach!

Each virtual c_wonder coding workshop aims to introduce participants to the fundamentals of coding and how it drives our technologically advanced society. Through the use of different and exciting educational technologies, students will be guided through a series of coding design challenges that reinforces their understanding of coding.

Engineering Outreach will be supporting students through this course; no previous experience is required!

Presented in partnership with Engineering Outreach, Faculty of Engineering and Applied Science, Ontario Tech University.

Check out the other c_wonder Workshops with Ontario Tech this winter!

Registration

You may register your child(ren) in person at any branch, by phoning Member Services at 905-623-7322 x2712, or online using the form below.

If you experience any issues with the form below or if it does not appear correctly:

  • Please try using an alternate browser, such as Google Chrome or Mozilla Firefox;
  • The event may be fully-registered. Please check back later to see if space has opened up.

Disclaimers

Before registering, please read the following disclaimers from Engineering Outreach, Faculty of Engineering and Applied Science, Ontario Tech University:

Caregiver Expectations

  • Ensure the participant is prepared for the sessions including gathering household materials in discussing the code of conduct with them.
  • Caregivers are responsible for monitoring their child during the session to ensure they are following the standards of behavior.
  • Communicate any issues with their child or issues with other children directly to the instructor through email.

Participant Expectations

  • Every participant has a responsibility to promote a safe environment and the right to be treated with respect and dignity.
  • Participants must come prepared, on time and ready to learn.
  • Microphones must remain on mute during the program unless called on by an instructor to ask a question or share their thoughts.
  • Participants are encouraged, but not required, to turn on their video camera so the instructor can assist and provide feedback as needed.
  • By joining the sessions, participants are consenting to the program being recorded by Ontario Tech University Engineering Outreach to be used for learning and improvement.
  • These videos will not be posted publicly unless edited to remove any participants.

Appropriate Behaviour

The following behaviors will not be tolerated and will either receive a warning or removal from the virtual program at the discretion of the instructor:

  • Bullying, threatening or aggressive behavior towards the instructor or other participants.
  • Using profane language or symbols in the chat.
  • Engaging in hate propaganda or other types of behavior caused by hate or bias.
  • Making inappropriate gestures or using objects to threaten or intimidate another person through video.
  • Knowingly uploading any links to the chat that contain a virus or malware.
  • Recording the programming or taking pictures of the participants.
  • Consistently refusing to mute their microphone or saying inappropriate things over the microphone.

Personal Safety

To protect personal safety, it is important that participants do the following:

  • Never reveal any personal information such as an address, phone number, etc. during the program to any participants.
  • Report any messages or behaviors during the program to your parents immediately and contact the instructor immediately.

 

Location: 
Date: 
Saturday, March 26, 2022 - 9:00am to 11:00am
Category: 
Audience: 

c_wonder Coding Workshop (Grades 1-4)

- Comments: 0

[Ages 6 to 10; Grades 1 to 4]

Online via Google Meet
Saturday, February 26th
9:00 to 11:00 a.m.

Advanced registration required; space is limited. Register online or by phone.

Boost your child’s STEM (science, technology, engineering, and math) skills with Ontario Tech University’s Engineering Outreach!

Each virtual c_wonder coding workshop aims to introduce participants to the fundamentals of coding and how it drives our technologically advanced society. Through the use of different and exciting educational technologies, students will be guided through a series of coding design challenges that reinforces their understanding of coding.

Engineering Outreach will be supporting students through this course; no previous experience is required!

Presented in partnership with Engineering Outreach, Faculty of Engineering and Applied Science, Ontario Tech University.

Check out the other c_wonder Workshops with Ontario Tech this winter!

Registration

You may register your child(ren) in person at any branch, by phoning Member Services at 905-623-7322 x2712, or online using the form below.

If you experience any issues with the form below or if it does not appear correctly:

  • Please try using an alternate browser, such as Google Chrome or Mozilla Firefox;
  • The event may be fully-registered. Please check back later to see if space has opened up.

Disclaimers

Before registering, please read the following disclaimers from Engineering Outreach, Faculty of Engineering and Applied Science, Ontario Tech University:

Caregiver Expectations

  • Ensure the participant is prepared for the sessions including gathering household materials in discussing the code of conduct with them.
  • Caregivers are responsible for monitoring their child during the session to ensure they are following the standards of behavior.
  • Communicate any issues with their child or issues with other children directly to the instructor through email.

Participant Expectations

  • Every participant has a responsibility to promote a safe environment and the right to be treated with respect and dignity.
  • Participants must come prepared, on time and ready to learn.
  • Microphones must remain on mute during the program unless called on by an instructor to ask a question or share their thoughts.
  • Participants are encouraged, but not required, to turn on their video camera so the instructor can assist and provide feedback as needed.
  • By joining the sessions, participants are consenting to the program being recorded by Ontario Tech University Engineering Outreach to be used for learning and improvement.
  • These videos will not be posted publicly unless edited to remove any participants.

Appropriate Behaviour

The following behaviors will not be tolerated and will either receive a warning or removal from the virtual program at the discretion of the instructor:

  • Bullying, threatening or aggressive behavior towards the instructor or other participants.
  • Using profane language or symbols in the chat.
  • Engaging in hate propaganda or other types of behavior caused by hate or bias.
  • Making inappropriate gestures or using objects to threaten or intimidate another person through video.
  • Knowingly uploading any links to the chat that contain a virus or malware.
  • Recording the programming or taking pictures of the participants.
  • Consistently refusing to mute their microphone or saying inappropriate things over the microphone.

Personal Safety

To protect personal safety, it is important that participants do the following:

  • Never reveal any personal information such as an address, phone number, etc. during the program to any participants.
  • Report any messages or behaviors during the program to your parents immediately and contact the instructor immediately.

 

Location: 
Date: 
Saturday, February 26, 2022 - 9:00am to 11:00am
Category: 
Audience: 

c_wonder Coding Workshop (Grades 1-4)

- Comments: 0

[Ages 6 to 10; Grades 1 to 4]

Online via Google Meet
Saturday, January 22nd
9:00 to 11:00 a.m.

Advanced registration required; space is limited. Register online or by phone.

Boost your child’s STEM (science, technology, engineering, and math) skills with Ontario Tech University’s Engineering Outreach!

Each virtual c_wonder coding workshop aims to introduce participants to the fundamentals of coding and how it drives our technologically advanced society. Through the use of different and exciting educational technologies, students will be guided through a series of coding design challenges that reinforces their understanding of coding.

Engineering Outreach will be supporting students through this course; no previous experience is required!

Presented in partnership with Engineering Outreach, Faculty of Engineering and Applied Science, Ontario Tech University.

Check out the other c_wonder Workshops with Ontario Tech this winter!

Registration

You may register your child(ren) in person at any branch, by phoning Member Services at 905-623-7322 x2712, or online using the form below.

If you experience any issues with the form below or if it does not appear correctly:

  • Please try using an alternate browser, such as Google Chrome or Mozilla Firefox;
  • The event may be fully-registered. Please check back later to see if space has opened up.

Disclaimers

Before registering, please read the following disclaimers from Engineering Outreach, Faculty of Engineering and Applied Science, Ontario Tech University:

Caregiver Expectations

  • Ensure the participant is prepared for the sessions including gathering household materials in discussing the code of conduct with them.
  • Caregivers are responsible for monitoring their child during the session to ensure they are following the standards of behavior.
  • Communicate any issues with their child or issues with other children directly to the instructor through email.

Participant Expectations

  • Every participant has a responsibility to promote a safe environment and the right to be treated with respect and dignity.
  • Participants must come prepared, on time and ready to learn.
  • Microphones must remain on mute during the program unless called on by an instructor to ask a question or share their thoughts.
  • Participants are encouraged, but not required, to turn on their video camera so the instructor can assist and provide feedback as needed.
  • By joining the sessions, participants are consenting to the program being recorded by Ontario Tech University Engineering Outreach to be used for learning and improvement.
  • These videos will not be posted publicly unless edited to remove any participants.

Appropriate Behaviour

The following behaviors will not be tolerated and will either receive a warning or removal from the virtual program at the discretion of the instructor:

  • Bullying, threatening or aggressive behavior towards the instructor or other participants.
  • Using profane language or symbols in the chat.
  • Engaging in hate propaganda or other types of behavior caused by hate or bias.
  • Making inappropriate gestures or using objects to threaten or intimidate another person through video.
  • Knowingly uploading any links to the chat that contain a virus or malware.
  • Recording the programming or taking pictures of the participants.
  • Consistently refusing to mute their microphone or saying inappropriate things over the microphone.

Personal Safety

To protect personal safety, it is important that participants do the following:

  • Never reveal any personal information such as an address, phone number, etc. during the program to any participants.
  • Report any messages or behaviors during the program to your parents immediately and contact the instructor immediately.

 

Location: 
Date: 
Saturday, January 22, 2022 - 9:00am to 11:00am
Category: 
Audience: 
Subscribe to STEAM